说明
The new Traffic Signal has been activated today. It's frequency does not match the light a 1/4 mile away at Warwick way. Currently at the new Traffic Signal the light for traffic entering Marriottsville road turns green when there is a vehicle waiting and no traffic on Marriottsville Road. At the Traffic Signal at Warwick Way, a vehicle waiting to enter Marriottsville road must wait the entire light cycle even if there is no traffic on Marriottsville road. Either traffic control method is acceptable, just make it consistent at two Traffic Signals just 1/4 apart.
还问了...
问 Select the concern
答 Traffic Signal Timing Problem
答 Traffic Signal Timing Problem
4 评论s
DPW HWYS Traffic (官方验证)
已确认 DPW Traffic Diane B (官方验证)
Brian Foreman (注册用户)
Marriottsville road is causing a much larger bottleneck on Marriottsville
road than the traffic signal ¼ mile away at Warwick way even though Warwick
Way has at least 5x the cross traffic. The exit ramp traffic signal needs
to be adjusted. The cross traffic should not trigger the signal more
frequently than the traffic signal at Warwick way since it has considerably
less traffic. Also, when the cross traffic signal is triggered, it should
turn red once traffic has cleared, instead of staying green for an extended
period with no traffic present.
关闭 DPW Traffic Diane B (官方验证)
Thank you for your report. This issue is not under County jurisdiction and must be addressed by the State Highway Administration (SHA). This ticket will be closed in SeeClickFix. The traffic signal on Marriottsville Road coming off of Rt. 70 is under SHA's jurisdiction.
Please contact the SHA directly at 410-582-5650 or toll free at 1-800-543-2515 or communications@sha.state.md.us. If you found an additional issue that needs the SHA's attention, their customer service webpage is available for your convenience: www.roads.maryland.gov or http://marylandsha.force.com/customercare/request_for_service